Tuesday, December 24, 2013

Gray Antique Dresser

 I painted my first antique dresser this past month and I can say I have learned a lot! Reading about something is totally different than when you're faced with a situation. At first I wanted to stain the top because I really like that look.




When I started sanding it there was water damage/mildew that went too deep, so I decided to to remove the veneer on top. Here's what it looked like before.


 I used a technique with an iron and wet rag. I soaked a rag(keeping it pretty wet) and I applied a very hot iron to it . With a putty knife I removed the veneer a section at a time.

.
   This whole top took about an hour. As you can see there was a very big spot on the top, so staining would not work.


I fixed the veneeer on the drawers with Bondo (also used for cars) and removed the small trim because some was already missing.


After sanding the entire piece, I decided to use chalk paint again. You can see my first attempt at chalk paint in my post on the drawers turned shelves . I like it because you can skip priming and you don't have the white showing through when you distress.


I mixed my own paint, using some of the wall paint I had left over from painting the room (just added some black). I ran into a little problem, when it dried it looked yellowish. I looked it up and found this happens to older pieces because of the stain used. If you applied  Zinsser Shellac, then painted again the problem is solved. You can also use it to block out smelly furniture (inside drawers).


I distressed it lightly and added some watered down white paint in the crevices that I wanted to pop, then I applied two coats of Rust-oleum  polyurethane in matte finish since it would be in a kids room and needed to be more durable. In the next post I want to show you the head board I built from a foot board and pallet wood (you can see a little sneak peek in the reflection of the mirror).
   Hope to see you soon!

Pin It

8 comments:

  1. Very pretty. Love the color. Which Rustoleum poly did you use?

    ReplyDelete
  2. I used a polyurethane in matte finish.

    ReplyDelete
  3. Gorgeous grey--it makes the dresser look so classy! Thanks for linking up!

    ReplyDelete
  4. Could you tell me or direct me to a link on how to distress the corners of your dresser like you did? I have an antique sleigh bed & Wardrobe in which I'm about to paint solid black. It's currently a yellowish/beige color. I on't know if the company used a faulty paint or what but when I originally purchased the set it was a beautiful antique beige color. Now it's yellow and not a pretty yellow. I'd planned on priming it first and then painting it with the black satin paint. I'm just not sure ho to get the spots distressed/aged looking. Thanks in advance for your help.

    ReplyDelete
  5. This article offered by you is very useful for proper planning.

    ReplyDelete
  6. Thank you for sharing excellent informations.

    ReplyDelete
  7. Your website is very cool. I’m impressed by the details that you have on this site.

    ReplyDelete